COTONE BIANCO ULTRA WS SH-9020 CB80

3926490566
CodiComercial:

Edition: 5
Date of approval: 01/09/2020

Belongs to the collections

The Art of Luxury Labelling

Technical datasheet

Front Label
Reference	COTONE BIANCO ULTRA WS
General characteristics	Natural 100% cotton paper with an ULTRA WS and anti-fungus treatment. Due to the nature of the raw material used, there may be the small impurities and/or slight variations in tone and appearance which are normal in a natural product.
Grammage (gr/m2) ISO 536	130
Thickness (µm) ISO 534	182

Adhesive
Reference	SH-9020
General characteristics	Water-based permanent acrylic adhesive. Good adhesion to polar surfaces in wet conditions and low temperatures. Especially designed for glass bottles, with excellent resistance to immersion in water/ice. It is not repositionnable.
Tack (N) glass FTM-9	>11
Cohesion (h) 1kg FTM-8	>2
Labelling temperature (ºC)	>5ºC
Usage temperature (ºC)	-20ºC/+80ºC

Support
Reference	CB80
General characteristics	Supercalendered glassine paper, white.
Grammage (gr/m2) ISO 536	78
Thickness (µm) ISO 534	67
Tensile strength MD/CD (KN/m) ISO 1924	MD(KN/m) >6,8 CD (KN/m) >3,0

Ice bucket

Fridge

Wet opacity

Neck Label

Not recommended

Additional information

The ultra WS treatment of the face material avoids the creases formation and reduces the water absortion on the face surface.

For small diameters applications pre-test are recommended.

We recommend the reels to be wound with the face side out. The test of resistance to immersion in water-ice is carried out by sticking a blank(unprinted) label on a standard glass bottle. Two days after the label is stuck on, it is submerged in an ice bucket containing icy water for a minimum period of 4 hours and its resistance to immersion is checked.

Uses and applications

Specially designed for product labels of high added value bottled in glass (wine, licquors,champagne, oil, water,....)

Printing

Suitable for printing in Offset UV, Screen and hot-foil.

Shelf life

2 years, under storage conditions as defined by FINAT section 2.5 (20-25ºC, 40-50% RH).Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life of the product.

The technical specifications given are general in nature and based on our knowledge, for which reason the suitability of our products for the end use to which they are put cannot be guaranteed. It is the purchaser’s responsibility to assess, test and ensure the suitability of each product for their end use through their own prior approval process; Arconvert S.A.. cannot therefore be held responsible for unsuitable end use of its products. These technical product specifications supersede all previous editions. All information is subject to change without prior notice.